SPECIFICATION
| Nominal press capacity (ton) | 220 |
| Capacity occur point (mm) | 3.2 |
| Stroke (mm) | 30 |
| Stroke per mimute (s.p.m) | 150-500 |
| Bloster area (mm) | 1800*950 |
| Bed opening (mm) | 1300*250 |
| Slide area (mm) | 1700*700 |
| Die height adjustment stroke (mm) | 370-420 |
| Die height adjustment motor (kw) | 1.5 |
| Feeding line height (mm) | 200±15 |
| Main motor (mm) | 45 |
| Total weight (ton) | 40 |




MACHINE FEATURES
FRAME
Made using stress-relieved high tensile cast iron for high rigidity and long-term precision.
The frame straucture is designed by means of "computerized finite element analysis". It provides the most efficient design for frame strain and strength. Tie-rods are used to tighten the frame, adding hydraulic preload to the structure to improve rigidity.
MINIMUM VIBRATION,MINIMUM NOISE
Outstsanding dynamic balancing design reduces vibratuon and noise to a minimum.
PRECISION MAIN SHAFT
Manufatured from Nickel Chrome Molybedenum alloy steel ,hardened and precision ground.
HIGH POSITIONING ACCURACY
High positioning accuracy and the best possible safety protection are guaranteed by sensitive separated type clutch and brake.
Plunger guides & slide guides utilize clearance free axial bearings.
Preloaded tie-rods are used on the slide guide for high rigidity, incorporating an extended guide for high dynamic and static precision, and considerably extending the service life of the punch dies.
LUBRICATION SYSTEM
Employs a forced lubrication with cooling system to minuze thermal strain of machine frame,upgrade stamping quality and extend service life of the machine. A pressure detection device is included with the lubricating system.
OUR WORKSHOPS








Hot Tags: h-frame punch press machine, China h-frame punch press machine suppliers, manufacturers, factory, H Frame Punch Press Machine, High Speed Gantry Press Machine, H Frame Fixed Bolster Presses Machine, H Frame Power Press Machine, Press Feeding System
