The feeder can be seen from the name, the feeder is a machine for conveying materials. The feeder is an indispensable equipment for both the light industry and the heavy industry. The feeder can increase the efficiency and speed of industrial production on a large scale. Then how do we operate during the use of the feeder, how to maintain the feeder.
First, in order to protect the safety of the staff on the machine, the operator must respect the above matters:
(1) If you need to terminate the work or make some adjustments to some devices, please turn off the power first.
(2) If the air pressure device is inspected or repaired, the air compressor must be stopped and the residual air removed.
(3) If the electromagnetic, pressure device, starter, etc. are inspected or adjusted, it must be performed by a professional.
Second, the maintenance inspection of the feeder
In order to ensure the stable mechanical performance of the NC feeder, as well as the safety of the machine, and to take into account the improvement of production performance, please do the following checks:
1. Feed the oil: the gear part of the roller, apply gear butter, and add or replace the gear oil.
2. Remove water: Press or rotate the button below the collection bucket to remove excess water.
3. Remove dirt between the rollers.
4. Is there any foreign matter between the gears?
5. Whether the oil pressure is normal, whether the pressure gauge is normal, and whether the pressure indicated by the pressure gauge is normal.
6. Is there any shallow leak in the air supply system?
7. Whether the screws and nuts combined between the mechanisms are loose.
8. Does the feed roller have a good parallelism (when the feed roller is closed, the upper and lower rollers are all tightly closed).
9, whether the parts are damaged, deformed, abnormal sounds or other abnormalities.
10. Is there any abnormality in the switch and indicator light on the operation panel?
