At present, domestic and foreign motor manufacturers have widely used large-tonnage high-speed punching machines with multi-station progressive die for the production of motor stators and rotor punches. This kind of processing and manufacturing method can greatly reduce the production of finished products and improve the finished products. Quality and efficiency.
However, the high-speed, high-precision production mode of the motor stator and rotor also brings new requirements to the feeder equipped with the punching machine. It needs the feeder to meet the needs of high speed, high precision and easy step change, but on the market. Mainstream air feeders, roller feeders, and NC servo feeders have their own deficiencies (the air feeder accuracy is not high, the roller feeder step adjustment is cumbersome, and the NC servo feeder speed does not meet the demand). Fully meet the needs of motor stator and rotor machining, so the stamping industry has created a new type of feeder, which is the gear feeder.
Fixed rotor stamping production line
The gear feeder, also known as the cam feeder, is a motor-rotor-specific feeding device. The punch output shaft is used as the power source. The change of the feeding step is realized by changing the gear without additional adjustment, and all the transmission components are It is intermittent rotation, which can meet the needs of frequent starting and braking. The relaxation action can be realized quickly by the eccentric wheel, and the relaxation is accurate and fast. It truly meets the requirements of high speed, high precision and convenient step change required for motor stator and rotor processing.
Gear feeder
Of course, in the actual process of the stator and rotor stamping process, before the Jinzhide gear feeder, it is necessary to arrange the discharge equipment and leveling equipment that can cooperate with it, and the good match is the unpowered double-head material frame + S-type whole The combination of the flat machine + gear feeder, the non-powered double-head material frame itself has no power to be unrolled by the subsequent leveling machine, the load capacity is large, the unwinding is fast and stable, and the refueling is quick and easy, and the S-type leveling machine adopts S The type of guiding system, two sets of photoelectric induction control discharge, breaking the discharge speed of the traditional leveling machine with a speed of 16m/min, the high discharging speed can reach 60m/min, and the three can be combined to form a synchronous stamping production line. It is the matching of the production press line of the motor fixed rotor processing.
