Except that the setting of the control panel of the servo Zigzag CN feeder is different from that of the common standard model, the biggest difference is the feeding action. It can move the feeding left and right, not only forward feeding, but also left and right feeding. It depends on the installation of a set of imported ball screw device driven by the servo motor under the head of the feeder, This set of independent and linkage device with the machine head can not only feed, but also make the machine head shift left and right along the linear slide rail driven by the lead screw, so as to realize the double axis alternating feeding. In this way, the layout of stamping position is optimized to save materials.
Now back to our topic, its function principle is similar. It is mainly controlled by PLC controller. The use method also adopts the point control operation of HD touch screen. Most functional operations can be completed on this screen. It can be operated manually, including setting parameters such as feeding length, speed, left and right deflection position, which is convenient and fast, High degree of automation.
Setting method of touch screen of servo Zigzag CN feeder
1. Turn on the power switch on the panel of servo Zigzag CN feeder, turn on the power, and the following information appears on the man-machine interface.
2. Press the screen prompt and gently touch the "enter main screen" button on the man-machine interface to enter the following main screen. The main screen of servo Zigzag CN feeder includes the following contents:
3. Set feeding speed / feeding length / output setting: parameters that must be set for program operation. The output setting value must be greater than the output count value, otherwise the automatic program will not operate. To clear the output count value, press and hold the "output reset" button for 0.5s.
4. Set the production speed: one punch per minute in the automatic mode, which is only used to monitor the running speed of the punch.
5. The main screen of Zigzag NC feeder can start and stop automatic operation, and manually drive the motor to feed and return materials. It is convenient to adjust the material position during mold test. Touch the "manual / automatic" button to switch to the automatic state, and touch the "automatic start" button to start the automatic operation of the Zigzag NC feeder.
