When it comes to punch feeders, people always think of early air feeders, cost-effective roller feeders, easy-to-use NC feeders, and clip feeders for high-speed stamping, but few people think of yaw feeds. Machine, little is known about it, then what kind of stamping automation equipment is the yaw feeder?
In order to understand the yaw feeder, we must first understand the general-purpose feeder. At present, the general-purpose feeding equipment known to the stamping owners is conveying in a straight line, whether it is feeding or pulling. This type of feeding When the equipment is used in the punching machine for the production of wafer material blanking, many scraps will be produced after each punching, which will result in a large waste of materials and low stamping efficiency, while the yaw feeder is specially designed for the wafer. A feeding device developed by the material processing and processing, which can be fed straight when used with a punching machine, and can be moved back and forth by right and left. The yaw angle and the yaw distance can be set automatically to realize the rounding time. The purpose of circular mutual cutting is to save material and improve the utilization rate of materials, and at the same time improve the production efficiency of the whole material.
The yaw feeder has two types of yaw air feeder and yaw NC feeder. The yaw air feeder is gradually eliminated by the market due to the high failure rate. Now the basics are yaw NC feeders. Here, Germany Machinery will explain the applicable scope and characteristics of the yaw NC feeder.
Hemiplegia NC feeder
Helicopter NC Feeder Scope: Jin Zhide yaw NC feeder is suitable for the processing of wafer, steel, copper, aluminum, special alloy and bimetal. The thickness of the material is 0.3-3.0mm. The applicable material width is 1800mm, and the large diameter of the cutting disc is 1000mm.
Performance characteristics of the yaw NC feeder:
1, Two-way alternating feeding, high output, and large material saving. The yaw NC feeder can be moved several times according to the diameter of the wafer blank to ensure round and cross-cutting, and the material utilization rate can be improved. If the size of the blank is not equal, it can be automatically The arrangement angle is calculated to ensure the material saving of the enlargement.
Hemiplegia NC feeder cutting effect
2, high-precision feeding, improve the precision of wafer cutting. Using a set of Mitsubishi PLC to control two sets of Yaskawa servo motor electronic control system, one set of servo motor system and feed roller are connected by synchronous pulley to achieve precise control of the feeding roller; another set of servo motor system and Taiwan Shangyin Precision The roller screw (standard for Jinzhide yaw NC feeder) is connected by synchronous pulley to complete precise left and right movement. In the continuous stamping process, the small distance between the sides and the side can be set within 0.5mm, and the yaw The feeding error of the feeder can be controlled within ±0.08MM to meet the increasingly high processing requirements.
3, simple operation, high degree of automation. When Jin Zhide yaws the NC feeder, the control system of the NC feeder automatically calculates the movement and movement only after inputting the width of the material on the 7-inch Weilun touch screen, the diameter of the required blanking circle, and the feeding step. The feeding distance does not require any mechanical mechanism to be adjusted, and it is truly fully automated.
