How to do the punching machine to produce scraping materials

Mar 20, 2019

Leave a message

During the stamping production process of the punch feeder, some customers often report the problems of scratching, scratching and damage of the stamping materials, except for some cases caused by improper operation of the operator or the material itself, which actually causes the scratching of the material of the punch feeder. There are two main aspects, one is the scratching of the material caused by improper adjustment; the other is that the material caused by the material scratch is very thin and very soft, there are different solutions for using different types of punch feeders, punch roller feeder , punched by NC servo feeder. The scratch solution was explained.

Punch feeder

1. The puncher of the puncher feeds the material.

The roller punch feeder uses a mechanical method of rotating the upper and lower rollers to carry out the feeding action of the punching material. During the feeding process, the pressure of the pressure spring can be adjusted to change the degree of compression, thereby realizing the relaxation of the mechanical punching rod. Sometimes the roller will also scratch the material. What is the main reason?

 

1. First check if the material thickness adjustment is correct. If there is no correct targeted adjustment, it can be solved.

2. Next, check if there are any foreign objects, such as iron filings, in the upper and lower rollers of the feeder, and clean them in time to avoid crushing the material.

3. There is also a reason that the material is very thin and the material is very soft. This feeder replaces the packaged PU plastic drum or is converted into a pull material.

NC feeder

Second, the punching machine NC feeding machine caused material scratches.

The operating principle of the NC feeder device is the same as that of the conventional feeding. The main method is to push the material held by the moving splint through the roller to realize the feeding function. In order to achieve the accuracy of the feeder, the movable clamp of the feeder requires a large clamping force. The splint itself is cast iron. If the material is thin, the soft material (aluminum, copper, etc.) can easily cause material stroke during the clamping action. mark.

Solution: When the conveying material is thin and the material is soft (aluminum, copper, etc.), the movable splint and the fixed splint of the gold feeder are covered with a film to solve the problem.

 

The material of the punch feeder is sent by the material rack, the leveling machine and the feeder to the punching machine for stamping production. It takes many steps. The stamping product molding needs a lot of procedures in the whole process, so there are many reasons for our stamping product materials. Scratch. Look at any link.


Send Inquiry