NC servo feeder is the most convenient, accurate and stable feeding equipment in the stamping industry. Its most common use is precision feeding of medium and thick sheet. However, in the actual stamping operation, many customers are stamping thin (even ultra-thin) strips into precision parts. For thin-plate (ultra-thin board) strips, it is impossible to achieve precise feeding by conventional push type. The strip will bend during the feeding process and cause the feeding to be inaccurate. How can the thin strip of material be automatically stamped?
The most stable and reliable way of automatic stamping of thin sheet material is pulling material. The Jinzhide NC servo feeder is installed on the side of the discharge port of the punching die, and the precision drawing is carried out in the sheet metal stamping to realize automatic stamping production.
NC servo feeder pull type
The model installed at the mold discharge port is also a pull type NC feeder, a reverse pull type NC servo feeder, and an NC servo puller, which is fixed to the discharge port of the punching die through the mounting plate, and passes through The stepping of the sheet material enables automatic stamping processing of the sheet material. When using the NC servo feeder, it usually installs a feeding bracket in the mold inlet instead of using the mounting plate to block the material and limit the material to avoid the material before entering the mold. Deviation, and then the sheet is pulled out by the pull type NC feeder, so that the bending of the feed is not caused, and the precision stamping processing is truly ensured.
Rewinding NC feeder production line
The appearance of the NC servo feeder is exactly the same as that of the standard pneumatic NC servo feeder. It only needs to be installed differently during installation, and the feeding direction can be changed in the touch screen during setting. Just use the changes for the first time). At the same time, when it is used for some ultra-thin materials and soft materials, it can be coated with PU glue on the upper roller of the feeding type NC servo feeder (there is also a need for customers to apply PU glue to the upper and lower rollers), so as to avoid ultra-thin The scratching phenomenon when feeding metal sheets or soft materials also fundamentally ensures the feeding accuracy.
One-to-one pull type NC feeder
Optional pull type NC servo feeder Special note: Before purchase, it is necessary to determine whether the tail material is broken after the stamping product. If there is no tail strip, it is not suitable for this model. Use the pull type NC servo feeder. It is necessary to have a tail strip after stamping.
