In order to ensure its long-term stability and accuracy, the three-in-one feeder of needs to carry out the necessary maintenance and maintenance work. The maintenance of the three-in-one feeder is mainly to carry out irregular maintenance and daily maintenance. Maintenance and maintenance of these two major items.
Unscheduled maintenance and repair of the one-and three-in-one feeder:
1. Clean the cover and touch screen of the three-in-one feeder: use a non-foaming neutral detergent and rag, then wipe with a rag containing water.
Thin plate of feeder maintenance
Note: Feeder equipment cover and touch screen cleaning Do not use organic solvents and gasoline, and do not directly spray water or spray steam.
Second, three-in-one feeder daily maintenance and repair content:
1. Check whether the operation of the photoelectric switch is normal when the three-in-one feeder is leveling the feeding part of the material. Check if the power indicator of the photoelectric switch is on. When there is a problem, check whether the light-emitting part of the photoelectric switch has dirt and whether the screw of the mounting part is loose.
2. check the three-in-one feeder material frame part of the ring position detection of the photoelectric switch is normal:
Confirm that the power indicator of the photoelectric switch is lit. When there is a problem, check whether the light-emitting part of the photoelectric switch has dirt and whether the screw of the mounting part is loose.
Thick plate three-in-one feeder maintenance
3. Check whether the action of it emergency stop button is normal:
a. Turn the 3-in-1 feeder [Power] switch to [ON].
b. Conduct a test run.
c. Press the [Emergency Stop] button to stop the operation.
d. Start running again.
e. If there is an abnormality, perform necessary repairs.
4. Operate the switches of the three-in-one feeder to check whether the device is working normally:
Powerful three-in-one feeder maintenance
a. Turn the [Power] switch to [ON] and select the manual operation mode.
b. Operate each button to check if the function is normal.
c. When you find a problem through functional testing, please contact nearest service point or after-sales service for consultation.
