Zigzag feeding machine, that is, it is a device that feeds by swinging left and right, so as to save materials. So under what circumstances will the tilting feeder be used? Let's first understand that the zigzag feeder is equipped with imported servo control system and two servo motors controlled by PLC. The difference is that the feeder head can move the feeder left and right, so this kind of eccentric feeder is generally used when processing circular materials or stamping parts with special shapes.
Nowadays, there are many feeding equipment that can be installed in the punch press, but the generally used automatic feeder, servo feeder and three in one feeder can only feed forward quantitatively in one direction. For the circular part material, because the width of the material used must be greater than the diameter of the circular product, the area of the remaining edge material (single row multi hole shape) after taking out the circular part after stamping is very large It is difficult to use and can only be treated as leftover materials. The utilization rate of materials is low, causing a lot of waste and increasing the cost. Therefore, the bi-directional moving feeding function of the yaw NC servo conveyor can maximize the use of materials. The problem of material waste is solved. The operation of the yaw type automatic NC servo feeder is also through the high-definition digital touch screen. In addition to setting the time and distance of the longitudinal feeder, the parameters such as moving the yaw left and right can also be programmed by yourself. Then, by setting the circular products that can make the stamping blanking cut and arranged on the materials, the utilization rate of stamping materials will be greatly improved. Generally, the deflection of NC feeder for 3 times can save more than 10% of the material cost.
The zigzag feeder has become one of the most commonly used feeders in major enterprises. The reason why it can be selected by the majority of enterprises is that its unique feeding mode of left-right skew displacement can not only minimize the leftover materials produced in stamping production, but also improve production efficiency, improve material utilization and create higher benefits for enterprises, It is especially suitable for the blanking production line of wafer.
