The heavy material frame is composed of the fuselage, the spindle, the material plate, the inductive control lever, the type a iron and the electric control box.
1, the bottom of the fuselage has a base plate, and the bottom of the base is fixed with a fixed support frame, fixed support set up with two sets of GB H steel foot;
2, the fuselage side is equipped with electric control box, the internal installation has a motor, electronic control box for easy control of the equipment, the motor under the rubber cushion;
3, the output of the motor is equipped with a reducer, the output of the reducer is mounted on the main shaft extending to the outside side of the fuselage;
4, the spindle near the end of the fuselage is installed with a backrest wheel, and the spindle away from the back of the wheel through the spindle sleeve installed hand crank, heavy material rack back wheel to avoid material deviation, hand-crank away from the spindle of the end of the installation of anti-skid handle;
5, the side of the spindle evenly installed there are four groups of supporting connecting rods, supporting the connecting rod mounted on a heavy material backing tile plate, supporting the connecting rod can adjust the diameter of the material winding, heavy material of the outer surface coated with a wear-resistant anti-slip coating, heavy material backing tile plate can carry heavy materials; 6, the fuselage at the bottom of the outer wall through the insulation board installation felt should control lever.
