1, often check each moving parts and fixed parts of the joint, if found abnormal phenomenon, then do a good job of fastening.
2, the machine can only correct flange plate welding deformation, can not correct the web and flange plate verticality and H-beam straightness.
3, the machine in the operation process, absolutely can not start the pressure device.
4, the work process, in and out of the material mouth shall not stand people, in order to avoid the H-beam injury.
5, the work of the lifting process can not be carried out in the track, to avoid the workpiece slipping, damage equipment. 6, Cycloid Reducer First Use one months later, should change oil. Change every six months thereafter.
