1. Numerical control feeding machine has good stability and higher feeding accuracy. The full set of Mitsubishi NC feeder control [Mitsubishi PLC, Mitsubishi servo motor and driver] is adopted for the NC feeder. The servo motor accurately drives the transmission of the feeding drum through the synchronous pulley. The feeding accuracy is much higher than that of the other two types of feeders, and the stability is good, The feeding accuracy will not be affected by external factors [the accuracy of roller feeder will be affected by the output shaft clearance, and the air feeder has high requirements for the sealing of the machine].
2. The CNC feeder is easy to operate and has a higher degree of automation. The NC feeder uses the touch screen point control operation mode. The basic parameters such as step distance and speed can be simply set on the touch screen, and is equipped with a test machine handle, which simplifies the adjustment and operation, and there is no need to adjust the step distance on the punch.
3. With a wide range of CNC feeding equipment. The installation of NC feeder can be fixed on the side table of the punch by using the mounting plate or independent frame. Unlike the roller feeder, it can be installed only when the punch has an output shaft. It can be used with punch presses of various brands and tonnage, such as Jinfeng punch, Xieyi punch, Yang forging punch, aumart punch, Aida Various well-known brand punches such as ymada, Amada, dobdy and Komatsu can be used for feeding and drawing. At the same time, they can also be used with laser cutting machine, plate shearing machine, hydraulic press, forming machine and other equipment to realize automation.
4. There are many types of CNC feeders with high degree of customization. Due to the limitation of its working principle, the width and thickness of applicable materials of air feeder and roller feeder are greatly limited. However, the CNC feeder is directly driven by servo motor, which has simple principle, wide application range and degree of customization. It has various models with a width of 100-1600mm, and the material thickness can be customized to 9mm according to the needs of customers, At the same time, we can also customize the tilting model according to the needs of customers for wafer stamping, so as to break the work bottleneck that the traditional feeder must feed in a straight line and save stamping materials
