1. High speed roller feeder one-way bearing
Embedded with superhard alloy and matched with roller bearing, it has wear resistance, safety, high precision and long service life.
The gear is precisely ground after heat treatment at HRC60 ℃ with high transmission accuracy.
2. High speed roller feeder roller
It adopts hollow type, light weight and small rotary inertia, which can be stopped immediately to ensure the feeding accuracy. After heat treatment HRC60 ℃ hard chromium plating and grinding, it has high hardness, excellent wear resistance and long service life.
3. Disc brake of high-speed roller feeder (general brake device)
The advanced clutch is used to make the two sides of the plate fully contact, with long service life, good stability and high precision.
4. Reverse device of high-speed roller feeder
(1) The structure is the same as that of the unidirectional device, which can control the next wheel quite accurately, and will not make the next wheel have the slightest reverse phenomenon after long-term use, with high stability and precision.
(2) The residual oil splashed during stamping will not cause brake failure, resulting in reverse rotation of the next wheel and inaccurate delivery distance.
(3) It is not easy to produce high heat.
(4) With superhard alloy and roller, it is not easy to wear.
(5) The action mode is that the roller moves in a circular motion without biting.
(6) The friction force is small, the required rotating torque is relatively reduced, and the rotating mechanism is less likely to be damaged.
(7) When the reverse device is equipped, the speed can reach 30m / min, generally 20m / min, increasing the efficiency by 50%.
(8) The special structure increases the service life.
