The three in one feeder can not be limited to small footprint, simple operation, and high price of three in one mold. Compared with other advantages of the separate production line made up of separate material rack, leveler and feeder, the following will be described by Li Hao machinery from the perspective of three to one feeder.
1. The three in one feeder has a wider range of application and can process thick plates and high strength metal thick plate materials that cannot be processed by the split stamping production line. As long as the split stamping production line is suitable for thin and medium plate materials below 4.0mm, once the thickness is thick and the material toughness is large, it can not be used for processing and production, so that many customers can only use the way of purchasing sheets and manual feeding for stamping production, and the emergence of three in one feeder fundamentally solves this processing problem, The maximum leveling material thickness can reach 12mm, and can be applied to the processing and production of various high-strength plates, so that the processing and production of thick plate materials can also be automated.
2. The three in one feeder has higher leveling and feeding accuracy and better quality of processed products. The split stamping production line composed of a single material rack, leveling machine and feeder is three completely separate equipment. There is a waiting area between each equipment, which makes the operation and matching of each equipment can not be fully synchronized even if each equipment is equipped with a frequency converter, which will eventually affect the accuracy of leveling and feeding more or less. The three in one feeder will separate the material rack, leveling The feeding is integrated into one machine, which makes the matching of machines fully synchronized. The control of PLC closed-loop system truly ensures the leveling and feeding accuracy.
3. The three in one feeder has compact structure and small floor space. Due to the need to reserve a waiting area between the machines in the split stamping production line, customers need to reserve a large and long space in the plant layout, especially for the materials above the medium plate. The layout space is often required to be about 10m, and some even need to dig pits on the ground. The three in one feeder closely combines the three machines, and the whole body is only about 4m, And there is no waiting area. The discharge bracket device directly enters the feed inlet of the punch die, which will undoubtedly greatly save the floor space.
