As a kind of numerical control feeding equipment, NC feeders need to pay attention to the use of PLC and servo motor drivers in the selection. It is also a point that can not be ignored. That is the way the man-machine interface is adopted. It directly determines Whether the operation of the NC feeder machine is simple, convenient, and stable and reliable.
NC feeder operation mode
The man-machine interface of the NC feeder has two kinds of text screens and touch screens. There is a big difference between the two.
1, NC feeder text screen, also known as text display, is the way used by old NC feeder. Features: Using the simple keyboard input parameters on the right side, only a few lines of text and other characters (similar to the old machine in the mobile phone) can be displayed, only to display and modify the data of some registers in the PLC. Due to the small display range of the screen, it is necessary to perform complicated operations when looking for the required NC feeder parameters.
NC feeder text screen
Advantages: low price.
2, NC feeder touch screen, is the way used by new NC feeder, the standard is Taiwan Weilun touch screen. Features: All the operation buttons are integrated into the screen, screen switching and parameter input are all operated on the screen (similar to the smartphone in the mobile phone), so the setting screen of the NC feeder is very intuitive, and the operating parameters and operation status are clear at a glance.
NC feeder touch screen
Advantages: a. Feeding various parameters (step, number, speed) input is extremely simple, the display is clear, and can be completed quickly.
b. You can monitor the running status of the machine at any time, check the current NC feeder parameters, in order to adjust the specific operating parameters.
c. The touch screen can display the cause of the machine failure, and manually adjust according to the cause of the failure, simplifying maintenance and repair.
NC feeder touch screen use
The same as the replacement of the keyboard phone with the smart phone, the touch screen NC feeder replaces the text screen NC feeder is an inevitable development trend, and there may be customers who can use the text screen to reduce the procurement cost, but the procurement cost is reduced, but the subsequent use, maintenance, The maintenance cost has been greatly increased, but it is not worth the loss. Therefore, we recommends that customers choose the new touch screen NC feeder.
