1. NC servo feeder:
The NC servo feeder adopts Yaskawa motor and precision servo system imported from Japan, which has stable performance and high feeding accuracy. On the premise that the mold has positioning pin, the feeding accuracy is ± 0.05mm. In terms of feeding speed, its fastest speed can reach 125m / min. It's really good to maintain such accuracy at such a speed.
2. New Gripper feeder:
Through cam drive, using the design mode of one globoidal cam and three plate cams, high-speed and stable feeding is realized. It is applicable to the material thickness of 0.08-1.5mm, low inertia, and the speed can reach 1500 times per minute. It is really moving towards the field of high-speed stamping.
3. Air feeder:
The feeder is the earliest feeder used in the stamping industry. It is mainly used for the receiving task of stamping products with low speed and low precision requirements. The feeding speed of air feeder is relatively slow and the feeding accuracy is not high, so it is phased out, but it is simple to operate and affordable.
4. High speed roller feeder:
The feeder has the advantages of simple structure, economy and practicality, low failure rate and easy maintenance. The feeding accuracy is very high. When there is a guide pin, the accuracy can reach ± 0.01mm, and the feeding speed can reach 30m / min when there is a reverse device. With the advantages of high feeding precision, high speed, no additional energy supply and low failure rate, the feeder has become the most widely used feeder at present.
The above is the feeding speed of several common feeders arranged for you. These feeders have high accuracy, environmental protection, time saving, greatly reduce labor intensity, and truly achieve low cost and high return.
